FABRICATION OF MULTI NUT OPENER AND TIGHTENER

Authors

  • Mr. S. B. Masuti Lecturer in Department of Mechanical Engineering, SVSMD’s KKI Polytechnic, Akkalkot, Solapur, Maharashtra, India
  • Mr. Muske Akash V Student, Department of Mechanical Engineering SVSMD’s KKI Polytechnic, Akkalkot, Solapur, Maharashtra, India
  • Mr. Kolle Shrikant S Student, Department of Mechanical Engineering SVSMD’s KKI Polytechnic, Akkalkot, Solapur, Maharashtra, India
  • Mr. Patil Akshay V Student, Department of Mechanical Engineering SVSMD’s KKI Polytechnic, Akkalkot, Solapur, Maharashtra, India
  • Mr. Achaler Prajotkumar S. Student, Department of Mechanical Engineering SVSMD’s KKI Polytechnic, Akkalkot, Solapur, Maharashtra, India

Abstract

                        This project aim is to fabrication of Multi Nut Opener and tightener for tightening and removing of four nuts altogether. With the increment of number of cars on the road, the number of cars problem due to tyre failure has increased. Often, the car is provided with tyre wheel nuts remover and jack for instance spare tyre replacement. Nevertheless, due to difficulty in applying torque to remove nut and to save a time. We develop tool having a gear mechanism. In our project we are tried to focus on the minimization of human effort for fixing all for nuts of 100mm PCD wheel. The main objective of work is to develop a single tool, which can be made use during assembling and disassembling of wheels in automobiles. It can be successfully used as standard tool irrespective of the model of the vehicle. Also, it can be used garages, workshops and service stations. The remover is designed to be ergonomic to be used, easy maintenance, easy storage, easy to handled and able to remove all nuts at once.

Downloads

Download data is not yet available.

References

Abd Azizul Rahman (MBA), University of Malaysia Pahang, Improvement & Optimization of Tire Nut removal, Malaysia,2008, 199-202(2012).

M. F. AbdRahim “Design, Development and Fabrication of Tyre Lug Wrench”.

University Technical Malaysia Melaka (UTeM), Thesis Degree, 2007.

V. Sarkar “Mechanics of Machines”. Tata McGraw-Hill, 2004.

E. Oberg, F. D. Jones, H. L. Horton and H. H. Ruffle (2008) “Machinery’s Handbook 28thEdition”.Industrial Press, 2008.

Abdullah, M.A, Shaharuzaman, M.A, Jenal, R., Boejang, H.,MatIdera, I.H. and MohdRazi, M.Z., Development of Conceptual Vehicle All-Wheel-Nuts Remover, Proceeding for the 2ndInternational Conference on Design and Concurrent Engineering.

R.S.Khurmi, J.KGupta, Machin, Design, S.Chand Publication

Downloads

Published

2021-09-09

How to Cite

[1]
Mr. S. B. Masuti, Mr. Muske Akash V, Mr. Kolle Shrikant S, Mr. Patil Akshay V, and Mr. Achaler Prajotkumar S., “FABRICATION OF MULTI NUT OPENER AND TIGHTENER”, IEJRD - International Multidisciplinary Journal, vol. 6, no. 5, p. 4, Sep. 2021.

Issue

Vol. 6 No. 5 (2021): Volume 6 Issue 5

Section

Articles

License

Copyright (c) 2021 IEJRD

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Most read articles by the same author(s)